非金屬單模光纜GYFTZY-24b1架空引導光纜18612905604

非金屬單模光纜GYFTZY-24b1架空引導光纜

GYFTA光纜的結構是將250μm光纖套入高模量材料制成的松套管中，松套管內填充防水化合物。纜芯的中心是一根非金屬加強芯（FRP），對于某些芯數的光纜來說，非金屬加強芯外還需擠上一層聚乙烯（PE）。松套管（和填充繩）圍繞中心加強芯絞合成緊湊和圓形的纜芯，纜芯內的縫隙充以阻水填充物。涂塑鋁帶（APL）縱包后擠制聚乙烯護套成纜。

The fibers, 250μm, are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. A Fiber Reinforced Plastic (FRP) locates in the center of core as a non-metallic strength member. The tubes (and fillers) are stranded around the strength member into a compact and circular core. After an Aluminum Polyethylene Laminate (APL) moisture barrier is applied around the cable core, the cable is completed with a PE sheath.

產品特點Characteristics

l   具有很好的機械性能和溫度特性

    Good mechanical and temperature performance

l    松套管材料本身具有良好的耐水解性能和較高的強度

    High strength loose tube that is hydrolysis resistant

l     管內充以特種油膏，對光纖進行了關鍵性保護

    Special tube filling compound ensure a critical protection of fiber

l   特別設計的緊密的光纜結構，有效防止套管回縮

    Specially designed compact structure is good at preventing loose tubes from shrinking

l  PE護套具有很好的抗紫外輻射性能

    PE sheath protects cable from ultraviolet radiation

l     采用下列措施來確保光纜的防水性能：

    The following measures are taken to ensure the cable watertight:

   單根非金屬中心加強芯

    Single Fiber Reinforced Plastic as the central strength member

   松套管內填充特種防水化合物

    Loose tube filling compound

   *纜芯填充

    cable core filling

   涂塑鋁帶（APL）防潮層

    APL moisture barrier

產品標準Standards

天潤電纜集團有限公司GYFTA光纜符合YD/T 901-2001和IEC 60794-1標準

YOFC（TJ）GYFTA cable complies with Standard YD/T 901-2001 as well as IEC 60794-1.

非金屬單模光纜GYFTZY-24b1架空引導光纜